Accueil > Outil de diagnostic automobile >

2018 CGDI Prog BMW MSV80 Auto key programmer + Diagnosis tool+ IMMO Security 3 in 1 Newly Add BMW FEM/EDC Function for Free

2018 CGDI Prog BMW MSV80 Auto key programmer + Diagnosis tool+ IMMO Security 3 in 1 Newly Add BMW FEM/EDC Function for Free

  • Catalogue de Produit:
  • Outil de diagnostic automobile
  • Modèle:
  • BMW FEM/EDC
  • Type:
  • BMW FEM/EDC
  • Prix unitaire:
  • US$ 655
  • modalité de paiement:
  • Western Union,T/T
  • Heure à jour:
  • 11-19-2018
Info en détails

Top 4 reasons to get CGDI Prog BMW MSV80:
1.High technical tool which mainly doing Auto diagnose, programming and security maintenance
2.Support CAS4/CAS4+ All Key Lost
3.Support BMW Key Programmer with OBD Functions
4.Newly Add BMW FEM/EDC Function

CGDI Prog BMW MSV80 BMW CGDI Prog Car Key Programmer

Top 9 Reasons To Get CGDI Prog BMW MSV80:

1.High technical tool which mainly support  Auto diagnose, programming and security maintenance 3 in 1.
2.Support Key Programming for BMW CAS1/CAS2/CAS3, and Support Key Matching and All key lost for CAS4 /CAS 4+;
3. Support BMW Key Programming with OBD Functions

4. Software response fast, short time programming, and new breakthrough in operation safety and technical support.
5. Supported Languages: English, Chinese
6.  Certification: CCC,CE,GS, CCC,CE,GS,ISO
7. Warranty:1 year
8. Free Update Online on official website http://www.cgprogcar.com/?langid=en, when you receive the device, please download software on official website too.
9. Newly Add BMW FEM/EDC Function for free

How to activate CGDI Prog BMW MSV80?

If your CGDI Prog BMW MSV80 was bought before November 2017, it needs activation when you receive it. Please follow the steps as below:

1. Download software from official website http://www.cgprogcar.com/?langid=en, there will be user manual too in the software catalogue
2. Install software on your laptop and read out serial number of your CGDI
3. Pass serial number to our customer service, we will give you activation code to use
4. This device need activate every 3 months, when it's invalid, please don't worry,  just pass us serial number again to activate for free

If your CGDI BMW was bought after November 2017, please directly download software from official website http://www.cgprogcar.com/ and use. It will get invalid every 3 months too, when it requires activation, please pass us serial number for free.

CGDI MSV80 BMW Car Key Programmer Support Module list:

1.BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching,KEY all lost matching,CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minus 100% safety.
2.BMW CAS4/CAS4+/Support key matching,support key all lost matching.
3.Support BMW key inspection,can check key what status in.
4.Support BMW engine computer DME replacement.
5.Support BMW MSV80/MSD80/MSD85/series OBD read ISN code (no need to split computer when matching key)
  Exciusively support in Domestic
6.Support BMW Key unlock.

CGDI MSV80 BMW Car Key Programmer CGDI Functions:

1.Update in real time,products updated in zero cycle time,support model added in real time.
2.BMW CAS3/CAS3+Data repair--support change replace and split CAS computer,BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine change computer,ISN code reading and writing.
3.Equipment security greatly enhanced, the hardware anti-crack,anti-software copy.
http://www.cg100iii.com/cgdi/CGDI_1.0.02.7z

CGDI Prog BMW MSV80 Support Model list:

ModelHas key to match keyWithout key to matchRead ISN codeReplace engine computer DMEBMW Key unkockWorking time
CAS1supportsupport

support1 minute
CAS2supportsupportsupport
support1 minute
CAS3supportsupportsupport
support1 minute
CAS3+supportsupportsupport
support1 minute
CAS4supportsupportsupport

30 seconds
CAS+supportsupportsupport

30 seconds




CGDI Prog BMW MSV80 Read MSV80 Specification:
Method 1: can read directly ISN code in the car,pls be assure car voltage is 12V above,directly connect OBD to operate--time about 5 minus.
Methods 2: can directly split engine computer (DME) to operate--connectline as follows:



MSV80/D80/D85/wiring in the experimental bench

CGDI Prog BMW MSV80 Software Update Guide:

Step 1. Receive message " There is a new version", click on "OK"
Step 2. Click on "Setting", then "Check for updates", waiting until the next dialog box appears.
Step 3. Checking local file.
Step 4. Detects a new file, click "Yes" to update.
Step 5. Downloading file.

CGDI Prog BMW MSV80 Firmware Update Gudie:

Step 1. Connect CGDI Pro device to the computer, open CGDI software.
Step 2. Click on "Setting" and then "Upgrade the firmware", waiting.
Step 3. Updating...
Step 4. CGDI programmer firmware update successfully, again click on "Upgrade the firmware".
Step 5. Get message reading " The version is already up to date without upgrading". Click on "OK".

Detail info about CGDI BMW MSV80 Software & Firmware Update pls visit Teah Support at the top section.

CGDI Prog BMW Customer Feedback:

CGDI PROG bmw f20 2014 mileage reset OK  
Read ISN DME MSD80 OK 5WK93628

CGDI Prog BMW MSV80 Package Includes:

1pc x CGDI Prog BMW MSV80 Main unit
1pc x Adapter
1pc x USB line

2018 CGDI Prog BMW MSV80 Auto key programmer + Diagnosis tool+ IMMO Security 3 in 1 Newly Add BMW FEM/EDC Function for Free
  • 2018 CGDI Prog BMW MSV80 Auto key programmer + Diagnosis tool+ IMMO Security 3 in 1 Newly Add BMW FEM/EDC Function for Free
  • 2018 CGDI Prog BMW MSV80 Auto key programmer + Diagnosis tool+ IMMO Security 3 in 1 Newly Add BMW FEM/EDC Function for Free
  • 2018 CGDI Prog BMW MSV80 Auto key programmer + Diagnosis tool+ IMMO Security 3 in 1 Newly Add BMW FEM/EDC Function for Free
  • 2018 CGDI Prog BMW MSV80 Auto key programmer + Diagnosis tool+ IMMO Security 3 in 1 Newly Add BMW FEM/EDC Function for Free
Envoyez votre message à nous
* Nous vous répondrons à votre demande à cet e-mail dès que nous le voyons(All fields are required.)
E-mail
 
  • /
Titre
Contenu

Accepter les engagements de service.